Ceramic Coating Cornwall

The GT350: Single-Stage Machine Polishing & Gtechniq Ceramic Coating

Restore clarity. Lock in gloss.

Typical outcomes

A focused one-step machine polish to revive your paintwork, followed by a Gtechniq ceramic coating that adds durable, hydrophobic protection and slickness for easier washing.  All of the coatings at GT are only applied in the workshop.

  • Turnaround: ~1 day (vehicle size/condition dependent)
  • Light defect reduction: ~60–80% (swirls/haze/oxidation)
  • Coating durability: up to 2 years (product choice, care, and storage dependent)
  • Finish: noticeably glossier, cleaner for longer, super slick

What is a single-stage polish?

  • A one-step machine polishing service using a matched pad/compound to refine paint, clear oxidation and haze, and reduce light wash marring—without the time and cost of multi-stage correction.
  • Best for newer vehicles or daily drivers with light to moderate defects.
  • Ideal preparation before applying a ceramic coating.

Why choose a Gtechniq ceramic coating?

  • Bonds to paintwork to create a dense, durable layer.
  • Strong hydrophobic behavior for fast beading and easier maintenance.
  • Resistance to UV, chemicals, and oxidation.
  • Options to suit priorities: EXO (slickness and beading), C1 (hardness and gloss), Crystal Serum Light (enhanced durability and chemical resistance).

Our process

  1. Inspection & prep
    Paint health check, snow-foam pre-wash, two-bucket wash, chemical and mechanical decontamination (iron, tar, clay), thorough drying, and masking.
  2. Single-stage machine polish
    Tailored pad/compound system chosen for your paint to balance cut and finish, restoring clarity and depth.
  3. Panel wipe & coating
    Alcohol-based wipe to remove polishing oils, then application of your chosen Gtechniq coating. Cure per product guidance and final inspection.

Benefits you’ll notice

  • Gloss that pops: restored depth and clarity.
  • Slick, easy washes: dirt releases more readily.
  • Reduced appearance of light swirls and haze.
  • Protection that lasts: months to years depending on product and maintenance.

Results you can expect

  • Sharper reflections and improved clarity after polishing.
  • Strong water beading and sheeting once coated.
  • Easier routine washing with less effort and fewer water spots.

FAQs

  • How long does it take?
    Most vehicles are completed in a day. Heavier contamination or complex shapes may take longer.
  • Will all scratches be removed?
    No. Single-stage targets lighter defects. Deep scratches, RIDs, or heavy swirls may require multi-stage correction. We’ll advise after inspection.
  • Which Gtechniq coating should I choose?
    EXO for maximum slickness and hydrophobics; C1 for added hardness and gloss; Crystal Serum Light for premium durability and chemical resistance. We’ll recommend based on your goals and storage.
  • How do I care for it?
    Use pH-neutral shampoo, quality wash media, and safe drying. Avoid automatic brushes. Periodic inspections and top-ups maintain peak performance.

Package guide (from)

  • Single-Stage Polish + EXO V5 — £350
  • Single-Stage Polish + Crystal Serum Light + EXO V5 — £450
    (Final pricing depends on vehicle size and initial condition.)
  • Single-Stage Polish + Crystal Serum Light + EXO V5 + Gtechniq smart interior protection— £500

What’s included

  • Full safe wash and decontamination
  • Single-stage machine polish
  • Panel wipe and Gtechniq ceramic application
  • Final inspection and aftercare advice

Important notes

  • Durability and results vary with product selection, annual mileage, storage (garage vs outdoors), wash method, and environmental conditions.
  • Deep defects, heavy etching, and sanding marks require multi-stage correction to chase near-perfect finish.

Booking

  • Tell us your vehicle (make/model/year/colour), current condition, and goals (gloss, protection, or both).
  • We’ll confirm availability and recommend the ideal Gtechniq package for you.